Forklift operator manpower supply, certified, assessed, on shift
Counterbalance, reach truck and VNA operators for warehouses, distribution centres, yards and plants across the UAE, with certificates verified and a practical assessment on your equipment before the first shift. tamdeed employs and sponsors them, pays them through WPS and shows you attendance and cost in your portal.
- Third-party operator certificate verified and stored
- CertThird-party operator certificate verified and stored
- Truck types: counterbalance, reach, VNA
- 3Truck types: counterbalance, reach, VNA
- Workers on registered contracts and WPS payroll
- 100%Workers on registered contracts and WPS payroll
- Fees paid by workers, ever
- 0Fees paid by workers, ever
What a forklift operator does, and what is checked before the first lift
A forklift operator moves goods that people cannot: unloading containers and trucks, putting pallets away to racking, picking at height, staging outbound loads and feeding production lines, on counterbalance trucks in yards and loading bays, reach trucks in racked warehouses and very narrow aisle trucks in high-density stores. In a UAE distribution centre the operators set the pace of the whole shift, and an untrained one is the most likely cause of a damaged rack, a dropped load or an injured picker.
Operators are checked on three things: a current third-party operator training certificate for the truck type, which most UAE warehouses and all industrial clients require; a practical assessment on the client's own equipment before the first shift, because a certificate says a person was trained, not that they can drive your reach truck in your aisles; and a safety induction covering the site's traffic plan, pedestrian zones and load limits.
tamdeed keeps operators on the bench by truck type, verifies each certificate and its expiry, stores it against the profile in your portal, runs the practical assessment with your supervisor, and supplies the pickers, packers and loaders who work with the operators. Every operator is employed on a MOHRE-registered contract, sponsored and insured by tamdeed, paid through WPS, and checked in at your warehouse with geofenced attendance.
Other trades we supply
Every trade page describes the same employment and the same charge sheet; only the work changes.
Where forklift operators are deployed
Distribution centres and e-commerce fulfilment
Reach and VNA operators for racked storage and pick faces, counterbalance operators for inbound and outbound, on shifts that scale with volume and peaks.
Ports, free zones and yards
Counterbalance and heavy-capacity operators for container devanning, yard staging and cross-docking in Jebel Ali, KEZAD and the northern ports.
Manufacturing plants
Operators feeding production lines, moving raw material and finished goods, and loading despatch in the Sharjah, Ajman and Dubai Industrial City estates.
Cold stores and food distribution
Operators for chilled and frozen stores, briefed on cold-store working patterns and rotation.
What is included with every worker
The same employment behind every trade. Nothing is bundled into the wage or left off the record.
Registered employment and sponsorship
Employed by tamdeed on a MOHRE-registered contract and sponsored on a residence visa by tamdeed. Your site carries no employment liability.
WPS wages every month
Paid through the Wage Protection System from approved attendance, with overtime at the statutory premium and an itemised payslip in the worker app.
Certificate verified, assessed on your equipment
The third-party operator certificate for the truck type and its expiry are verified and stored against the profile with renewal alerts; every operator passes a practical assessment on your equipment with your supervisor before the first shift.
Medical insurance and documents
Cover from day one; Emirates ID, labour card and medical fitness tracked with expiry alerts in your portal.
Safety induction and PPE
Site safety briefing before the first shift, PPE issued as agreed on the charge sheet, midday break and rest rules enforced by the platform.
Geofenced attendance
Check-in and check-out at your site from the worker app, so the hours you are billed are the hours worked.
Supervision and replacements
A named tamdeed contact, performance notes against each worker, and replacement from the bench when someone does not meet the standard.
One itemised invoice
Wage, government fees at cost, insurance, accruals, transport where agreed and administration on separate lines every month.
From brief to first shift
Workers already on the bench mobilise in days; roles that need recruiting or a new visa take longer, and we say which at the brief.
- 1
Brief
Headcount, grade mix, site, start date, duration and shift pattern, plus any site pass or client induction the job requires.
- 2
Match and verify
Bench operators by truck type first, recruitment where needed. Certificates and expiries verified, practical assessment on your equipment run with your supervisor, documents checked, the mix of operators and floor staff confirmed to you.
- 3
Charge sheet
Every monthly line, or the hourly rate for short cover, approved in your portal before anyone moves. Government fees at cost.
- 4
Mobilise and track
Induction, transport where agreed, geofenced check-in from the first shift, payroll and invoices running on the platform.
Operator types and the floor staff around them
Operators
- Counterbalance operators
- Reach truck operators
- VNA operators
- Heavy-capacity operators, on request
- Pallet truck and stacker operators
- Cold store operators
Floor staff
- Pickers and packers
- Loaders and unloaders
- Inventory clerks
- Despatch clerks
- Yard marshals
- Warehouse supervisors
Supplied alongside
- Drivers
- General helpers
- Store keepers
- Production helpers
- Maintenance helpers
- Site supervisors
Counterbalance, reach or VNA: match the operator to the truck
A certificate for one truck type is not a certificate for another. Say which you run.
| Counterbalance | Reach truck | VNA | |
|---|---|---|---|
| Used for | Yards, loading bays, container devanning | Racked warehouses, put-away and picking at height | High-density, narrow-aisle stores |
| Checked by | Certificate and assessment in the yard | Certificate and assessment in the racking | Certificate and assessment in the aisle, with the guidance system |
| Typical roster | Inbound and outbound shifts | Warehouse shifts | Warehouse shifts |
| Wage line | By certificate | Higher | Highest |
How a forklift operator rate is built
An operator's monthly rate is the wage for the truck type plus the real costs of employing the worker, plus administration. Reach and VNA operators sit on higher wage lines than counterbalance operators; pickers, packers and loaders on lower ones; the rest of the rate is the same set of lines for every worker.
Peak cover is billed on hours from the attendance record; ongoing shifts on a monthly charge sheet. Government fees change from time to time and are passed through at cost.
Illustrative structure, not a tariff. Live pricing applies to one to ten workers; larger crews receive a custom charge sheet built from the same lines, before you commit.
Certificates and shifts on one screen
Which operators are certified for which truck, whose certificate renews next quarter, who checked in for the night shift and what the crew costs this month.
Questions, answered plainly
What is forklift operator manpower supply?
The supply of certified forklift operators employed and sponsored by a licensed supplier and deployed to a client's warehouse, yard or plant at an agreed rate, usually with the pickers, packers and loaders who work around them. tamdeed verifies certificates, assesses each operator on your equipment, employs them on registered contracts, pays through WPS and bills from a geofenced attendance record.
Are your forklift operators certified?
Yes. Every operator holds a current third-party training certificate for the truck type, verified before mobilisation and stored against the profile with renewal alerts, and passes a practical assessment on your equipment with your supervisor before the first shift.
Do you supply reach truck and VNA operators?
Yes. Counterbalance, reach truck and VNA operators are kept on the bench by truck type; heavy-capacity operators are supplied on request.
Can you supply the pickers and packers with the operators?
Yes, and most warehouses do: operators, pickers, packers, loaders, inventory clerks and a supervisor as one crew on one charge sheet, scaling with volume through peaks.
Do you supply operators for night shifts and peaks?
Yes. Two and three-shift rosters are set in the platform, and peak cover for sales periods and stock counts is billed on hours from the attendance record.
Who is the legal employer?
tamdeed. Operators are employed on MOHRE-registered contracts, sponsored on residence visas and paid through WPS by tamdeed. They report to your warehouse for the work.
How fast can operators start?
Certified operators already on the bench and in the UAE can start within days of an approved charge sheet and the assessment on your equipment. Operators who need recruiting take longer because the visa process sets the pace.
What does a forklift operator cost per month in the UAE?
It depends on the truck type, the roster, the contract length and the headcount. tamdeed itemises the wage, government fees at cost, insurance, gratuity and leave accrual, PPE and transport where agreed, and its own administration line.
Tell us about the warehouse
Truck types, headcount, shifts, site and dates. A tamdeed adviser replies with availability and an itemised rate.